Guys,
Just finished replacing the head gasket after a wrong diagnosis, so nothing wrong with the head. Well after two days are everything back together and has just started up. Everything is fine, but it sounds like the valve sequence is out as there is a clicking sound with every cycle. What I would like to know is the following:
The valves (intake and exhuast) were set at 0.2mm cold on the sequence 1,2,3,6,7,10 with No 1 Piston at TDC and then the reverse with no 6 piston at TDC. This is presuming No 1 cylinder is at the front of the car. Is this correct, any suggestions?
Noise from engine
-
Tinus lotz
- Moderator
- Posts: 7590
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 802 times
- Been thanked: 562 times
-
KEENO
- Full Member
- Posts: 24
- Joined: 05 Aug 2011 08:55
- Full Name: JACQUES
- Nickname: JACQUES
- Home Town: GEORGE
- Current 4x4: 2000 PATROL 4500
- Home Language: AFR
Re: Noise from engine
Thanks Tinus,
It was a push rod that slipped passed the rocker, everything back and engine running smoothly.
It was a push rod that slipped passed the rocker, everything back and engine running smoothly.
-
Herrie
- Patrolman 1000+
- Posts: 2999
- Joined: 08 Apr 2009 07:17
- Full Name: Kobus Pienaar
- Nickname: Herrie
- Home Town: Kempton Park
- Current 4x4: 1999 Patrol 4500e GRX
1983 Datsun Safari - Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 55 times
- Been thanked: 94 times
Re: Noise from engine
Ek is bly alles is nou reg!!
Herrie op Safari/Patrollie
1983 Safari
1999 Patrol 4500 GRX
1983 Safari
1999 Patrol 4500 GRX
Who is online
Users browsing this forum: No registered users and 1 guest