Ball joints replace or service?
- davidvdm
- Patrolman
- Posts: 629
- Joined: 13 Sep 2011 15:47
- Full Name: David vd Merwe
- Nickname: David - Hillbilly
- Home Town: West Coast
- Current 4x4: 1997 2.7TD Nissan Sani Mk3 4x4 SFA (SAFANI)
- Home Language: English/Afrikaans
- Has thanked: 4 times
- Been thanked: 48 times
- Contact:
Re: Ball joints replace or service?
Eish, I'm still looking for a supplier for the Tie Rod ends for a 80-83 Safari (MK). Else I'm going to have to look at modding something up to fit Heims. My rubbers are shot, and although it feels solid enough, they need to be replaced as one of my possible causes of my death wobble.
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
-
- Patrolman
- Posts: 640
- Joined: 07 Apr 2009 07:13
- Full Name: Malcolm van Coller
- Nickname: mvcoller
- Home Town: In most reverse order - Jhb, V-Town, Vryburg, CT
- Current 4x4: 2008 3.0 Di Patrol GL
and
1999 4.5 Patrol SGL - Home Language: Afr & Eng
- Location: Befordview
- Has thanked: 40 times
- Been thanked: 179 times
- Contact:
Re: Ball joints replace or service?
Is your Sani down on the West Coast yet?
About time you change your "Home Town", still says Carletonville on your profile, I would says that is a bit our of date now that you a crawling around on the "sandvlaktes" "near" the sea...
About time you change your "Home Town", still says Carletonville on your profile, I would says that is a bit our of date now that you a crawling around on the "sandvlaktes" "near" the sea...
- davidvdm
- Patrolman
- Posts: 629
- Joined: 13 Sep 2011 15:47
- Full Name: David vd Merwe
- Nickname: David - Hillbilly
- Home Town: West Coast
- Current 4x4: 1997 2.7TD Nissan Sani Mk3 4x4 SFA (SAFANI)
- Home Language: English/Afrikaans
- Has thanked: 4 times
- Been thanked: 48 times
- Contact:
Re: Ball joints replace or service?
Sani still in Parys. Sorry about the hometown, have not got to much lately.. Sani suddenly got some attention today. My buddy decided to load the battery bay with a 240Ah battery and give it a whirl since it's been parked since the beginning of February. One glo, and he fired right up. So he got a bit of a clean out today. My move to the Coast still packed in the rear all this time, and a layer of dust so thick, he could not see out the windows. Washed down with a fire hydrant, and got driven around a bit. Emil willing to spend a bit of time in and under Hillbilly, maybe do one or two things if he can.
I am hoping that new ball joints on the tie rod and steering linkage can be sourced and done as a start. I don't know when I am going to get to the Sani, but I want to check preload on the Kingpins, maybe even replace those bearings. But don't ask me where the shims are I removed. Packed away in a toolbox somewhere, who knows where. I feel I need to add another cross member in the front. I only realised later that the original (much lower mounted) cross member, that the original diff hung on, was giving the chassis support, and adding a new one, could stiffen up the chassis directly over the panhard mount. But I need to work something out, as this needs to happen right where the original engine mounts are welded to the chassis.
Eish, here I go again, , wrong thread for this discussion
GUYS, I NEED BALL JOINTS
I am hoping that new ball joints on the tie rod and steering linkage can be sourced and done as a start. I don't know when I am going to get to the Sani, but I want to check preload on the Kingpins, maybe even replace those bearings. But don't ask me where the shims are I removed. Packed away in a toolbox somewhere, who knows where. I feel I need to add another cross member in the front. I only realised later that the original (much lower mounted) cross member, that the original diff hung on, was giving the chassis support, and adding a new one, could stiffen up the chassis directly over the panhard mount. But I need to work something out, as this needs to happen right where the original engine mounts are welded to the chassis.
Eish, here I go again, , wrong thread for this discussion
GUYS, I NEED BALL JOINTS
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
- davidvdm
- Patrolman
- Posts: 629
- Joined: 13 Sep 2011 15:47
- Full Name: David vd Merwe
- Nickname: David - Hillbilly
- Home Town: West Coast
- Current 4x4: 1997 2.7TD Nissan Sani Mk3 4x4 SFA (SAFANI)
- Home Language: English/Afrikaans
- Has thanked: 4 times
- Been thanked: 48 times
- Contact:
Re: Ball joints replace or service?
Thread revival time....
A while back I'm chatting to a comp truck guy in Aussie who drives a MQ, and he points me in the direction of Terrain Tamer for Tie Rod Ends for the 80-83 Safari. I could not find it on the website, but he told me to speak to my local supplier. I remember looking for a local website, but was not successful. Yesterday I come across the SA4x4 website link and drop an enquiry. Well the good news they can supply the Tie Rods, but they going to cost me half of the purchase price I paid for the Safari . So if anybody is looking, Terrain Tamer has them.
I will just have to hold off on this as long as I can, and hope it lasts long enough to do my Heim conversion. Although, as I do not need the steering rod connection to the Tie Rod, I could get away with the driver side unit on both ends, and lengthen the Tie Rod. This would save me R1600 excl right there.
A while back I'm chatting to a comp truck guy in Aussie who drives a MQ, and he points me in the direction of Terrain Tamer for Tie Rod Ends for the 80-83 Safari. I could not find it on the website, but he told me to speak to my local supplier. I remember looking for a local website, but was not successful. Yesterday I come across the SA4x4 website link and drop an enquiry. Well the good news they can supply the Tie Rods, but they going to cost me half of the purchase price I paid for the Safari . So if anybody is looking, Terrain Tamer has them.
I will just have to hold off on this as long as I can, and hope it lasts long enough to do my Heim conversion. Although, as I do not need the steering rod connection to the Tie Rod, I could get away with the driver side unit on both ends, and lengthen the Tie Rod. This would save me R1600 excl right there.
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: Ball joints replace or service?
David, I'm going to whatsapp you Marinus number from Terrain Tamer here in SA. He is a hell of a nice guy, and has looked after me over the years with the things I've bought from him. Their parts are really good (well the stuff I have bought) and I found their parts the same or marginally cheaper than what i could get locally (brake rotors and discs and water hoses).
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- davidvdm
- Patrolman
- Posts: 629
- Joined: 13 Sep 2011 15:47
- Full Name: David vd Merwe
- Nickname: David - Hillbilly
- Home Town: West Coast
- Current 4x4: 1997 2.7TD Nissan Sani Mk3 4x4 SFA (SAFANI)
- Home Language: English/Afrikaans
- Has thanked: 4 times
- Been thanked: 48 times
- Contact:
Re: Ball joints replace or service?
Cedric, it's Marinus that sent me the email with the pricing. I must be losing touch with reality or something. I'm just not accustomed to spending R3k Ex Vat on a Tie Rod end. My D21 Teknorot Tie rod ends were R280 shipped and delivered to the middle of the bush.ricster wrote: ↑05 Mar 2021 13:37 David, I'm going to whatsapp you Marinus number from Terrain Tamer here in SA. He is a hell of a nice guy, and has looked after me over the years with the things I've bought from him. Their parts are really good (well the stuff I have bought) and I found their parts the same or marginally cheaper than what i could get locally (brake rotors and discs and water hoses).
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: Ball joints replace or service?
Yeah stuff is expensive as time rolls on and our Rand falls ....
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Who is online
Users browsing this forum: Ahrefs [Bot] and 27 guests