Page 1 of 1

Agterligte

Posted: 12 Jan 2014 15:12
by Frans Reichert
Enige iemand hier al die groot agterligte gekoppel, wat benodig ek as ek dit wil doen?

Re: Agterligte

Posted: 12 Jan 2014 15:49
by Jorrie
Soek deur Chris Skinner se posts vir die antwoord.

Re: Agterligte

Posted: 12 Jan 2014 16:46
by Kagiso II
Kobus [Herrie op Safari] het al -- en Graham doen dit vir jou [hy sit LED kit ligte in ]

Re: Agterligte

Posted: 13 Jan 2014 14:13
by Frans Reichert
Wat is Graham se forum naam, waar soek ek na hom? :helpsign:

Re: Agterligte

Posted: 13 Jan 2014 14:26
by Marino4x4
Hi Frans

Ek het my ligte ook gedoen so jaar of wat terug. Jy gaan n hole saw, light fittings en n bietjie silicone nodig he. Om die ligte te koppe is nie vreeslik moeilik nie. n Auto electrician behoort dit vir jou te kan doen as jy skrikerig is om dit self te doen. Anders is dit so uur se werk. n Mens koop sommer LED ligte by n kar plek en sit dit in, dit is wat ek gedoen het.

Graham se forum naam is Pathmaker

Sterkte

Re: Agterligte

Posted: 13 Jan 2014 15:40
by IanT
Or you could take the easy but more expensive route and replace the lights as I have done on my 4.8 and 4.5 got them through Graham about R2200 for the 4.8 and R1900 for the 4.5 takes about 5 mins to fit (also have the old ones I took out if anybody is looking!)

Re: Agterligte

Posted: 13 Jan 2014 15:57
by Clem
IanT wrote:Or you could take the easy but more expensive route and replace the lights as I have done on my 4.8 and 4.5 got them through Graham about R2200 for the 4.8 and R1900 for the 4.5 takes about 5 mins to fit (also have the old ones I took out if anybody is looking!)
The easiest and IMHO most effective - lenses are also the correct colour.

Re: Agterligte

Posted: 14 Jan 2014 08:28
by Frans Reichert
Dankie almal vir julle raad. :thumbup:

Re: Agterligte

Posted: 14 Jan 2014 09:09
by Chris Skinner
Hey Frans - To mod and connect the lights is a very simple and rewarding Saturday morning job, if you are a little technically inclined. There are a niumber of posts on teh forum that explain what is needed.
You can contact me if you need more info.