Nissan Patrol 4x4 (Africa)

I need to build the brake bias adapter but need to know what the difference is between my actual lift and the standard suspension Patrol. Could someone with a standard suspension please measure the distance between the center of the wheel and the fender .

Thanks

The standard measurment is normally from the bottom of the rim to fender - but my Patrol is not standard because I got the 2" lift.

Myne is die model voor joune gaan dit help?????

Hi Tinus,
Ek dink dit sal help, ek kan nie dink dat dit meer as 10mm of iets sal verskil nie. Dankie

brake bias adapter Nou kjennertjies -- voorlat jelle EEN tree verder aangaan - WAT te d***r is die "bias adapter" is sy maaamie emn wat maak hy as hy werk??

It's a simple device that based on the difference in in length between the body and the axle will change the brake force on the rear wheels. When loaded the length is shorter and this valve then allows the rear brakes to brake more. So when we lift the car we changes the length and ideally we should return the setting to the original position. that's why lifted car are so easy on rear brakes _ they do not use them properly

Ooooo -- DANKIE

Andries/Tinus

Measure from top of axle tube to rear bump stop. We know those points haven't changed!

You could also use spring length.

Ek sal probeerr. Maar moet ons nie more na werk n tape vat en meet nie?????

Klink vir my na n goeie idee, sal more jou n lui gee