Page 1 of 1
Work shop manual
Posted: 07 Aug 2011 09:22
by Gadgetman
I am looking for a workshop manual for a 1998 4.5 GRX. I have a serious knocking sound coming from the transfer box, infact one can put your hand on it and actually feel it. (The car is obviously raised as the noise happens in gear) I have had it taken apart and there is no apparent obvious damage, put back together and the knocking persists.
Need the manual to investigate further.....
Re: Work shop manual
Posted: 07 Aug 2011 17:46
by duckitt
Waar bly jy. Ek kan jou help met info maar jy sal moet koppies vir jou mAak
Re: Work shop manual
Posted: 07 Aug 2011 21:37
by Tinus lotz
Het ook n spaar ratkas en een met n tranfer case op ?laat weet maar
Re: Work shop manual
Posted: 07 Aug 2011 21:39
by Tinus lotz
Het ook manual vir jou op cd ek is in centorion
Re: Work shop manual
Posted: 08 Aug 2011 07:35
by Peter Connan
Hello Gadgetman
This link is for the Y60's Nissan Factory manual.
http://myswag.org/downloads/GQ%20Patrol ... Nissan.zip
The part number for the transfer case is the same for both cars though.
Re: Work shop manual
Posted: 08 Aug 2011 08:14
by Gadgetman
Thanks guys I am in Cape Town Noordhoek, would happily pay for a courier to pick up a copy if possible.
My brother in law is in JHB so even he could arrange to pick a copy for me??
Tinus I might need to look at a new transfer box if I cannot resolve this issue. I also have another 4.5 but I was hoping to sell
it as having two is just too much for me and rather than use it for spare parts...
Peter thanks for the link I shall try it now!
Re: Work shop manual
Posted: 08 Aug 2011 08:32
by Gadgetman
Just downloaded the file Peter and all there THANK YOU!!!
Re: Work shop manual
Posted: 08 Aug 2011 17:33
by Gadgetman
Found the problem. A gear tooth chipped off and damaged a gear. Need to replace two gears. Not sure if its cheaper to buy new parts or find a transfer box second hand??