Page 5 of 12

Re: One Man's Trash

Posted: 03 May 2017 07:40
by Ds J
David M wrote: Jaap hy's joune. Ek skat so 10 liter.

Hoe kry ons hom by jou?
Die oliepan is veilig in Stella. Baie dankie!

Re: One Man's Trash

Posted: 01 Jun 2017 14:16
by graham1
Is there no one who wants this stuff? Its taking up valuable garage space!

Posting again:

I have a set of third row seats from my 2004 4.8. They're the light grey (cream?) leather.
I reckon they've never ever been sat on in their lives. I haven't taken them out of the black bags they're in, but I'm sure they're fine.

Also have an old bfg AT taking up space. Will be good for a spare tyre. 31x10.5x15

Re: One Man's Trash

Posted: 01 Jun 2017 18:17
by Peter Connan
I would gladly take the BF off your hands.

Re: One Man's Trash

Posted: 01 Jun 2017 19:13
by DaleB
Graham, do the seats come with the bolts and what not to fit them? Would be interested to see if I can get them to fir my GL.
Dale

Re: One Man's Trash

Posted: 02 Jun 2017 07:08
by graham1
Peter Connan wrote:I would gladly take the BF off your hands.
Awesome! I'll send you a PM now

Re: One Man's Trash

Posted: 02 Jun 2017 07:13
by graham1
DaleB wrote:Graham, do the seats come with the bolts and what not to fit them? Would be interested to see if I can get them to fir my GL.
Dale
Hi Dale,

Im actually not sure now. I'll check, but what I think is the case is the bolts are currently being used for the small little packing system thats in the back. As far as I can tell the seats are only bolted in by two bolts on each side, just above the wheel arch, I guess you can just get four new bolts from the hardware store?

Youre more than welcome to take them and try?

Re: One Man's Trash

Posted: 02 Jun 2017 07:27
by David M
You are going to need the 4 bolts (2 each side to mount) - Get them from Nissan so that they are the correct strength.

Do you have the 2 U brackets that fit on the floor. If not you need to get them from Nissan or Dawid probably has. The bolts are probably there closing the holes.

Do you have the seatbelts and their mountings?

Re: One Man's Trash

Posted: 02 Jun 2017 08:02
by graham1
I dont know about the U-brackets, are you referring to the brackets that are recessed into the floor of the vehicle? If so, I'll keep those in, I think.

Im not sure on the seatbelts actually, Ive never taken note of that, would the belt and reels not be built into the roof somewhere?

Re: One Man's Trash

Posted: 02 Jun 2017 08:20
by David M
graham1 wrote:I dont know about the U-brackets, are you referring to the brackets that are recessed into the floor of the vehicle? If so, I'll keep those in, I think.

Im not sure on the seatbelts actually, Ive never taken note of that, would the belt and reels not be built into the roof somewhere?
I was asking Dale if he had them.

The U brackets are the ones recessed into the floor.

Seatbelts are behind the plastic in the back corners. If you have changed to packing system I suggest taking them out or you have a constant knocking sound coming from the back on any rough road. This however does involve removing the plastic mouldings to do.

Re: One Man's Trash

Posted: 02 Jun 2017 11:07
by Michael
I also have a set of cloth 3rd-row seats if anyone is interested, just collecting dust in my garage roof