Page 3 of 4

Re: 1999's Alarm Remote Replacement

Posted: 09 Apr 2014 04:49
by SJBS
Hi Florian,
From the link below it seems like Conlog could have been the company.

Conlog History

The question is just - will you be able to find someone in the company that will be willing and able to assist :think:

The following is their numbers from theirsite:

Tel: +27 (31) 268-1111

Their e-mail address is also there, but knowing South African companies, it probably goes to a dormant account, or at most responded annually....

Keep us posted as the remotes that I had fixed is on the blink again

Re: 1999's Alarm Remote Replacement

Posted: 10 Apr 2014 14:21
by Florian320
Hi SJBS,
thanks for the link.
I also found that website before but came to the conclusion, that it must be a different company: they are offering power network solutions and other infrastructural things.
I was quite sure, that it doesn't have anything to do with the conlog that manufactured my remote.

Do you have different information?

Re: 1999's Alarm Remote Replacement

Posted: 10 Apr 2014 17:36
by Ink
I had the same system in mine but it went on cut off (anti hijack ) while driving , so i change to a cat eye system R450.00. Work perfectly

Re: 1999's Alarm Remote Replacement

Posted: 10 Apr 2014 18:19
by Florian320
That sounds good!!
Do you have a contact or website for that system? And did you do the replacement by yourself? It would be really nice to know where the box is placed in the car before tearing everything apart.

Re: 1999's Alarm Remote Replacement

Posted: 10 Apr 2014 18:37
by Ink
Cat eye goedkoop in zambezi pretoria by n sound shop , het dit self ingesit en dit is baie maklik . Die ou sesteem se boks/unit sit by die bestuurder se voete regterkant panel cover . Dis n alarm imobeliser antihighjack and central locking system

Re: 1999's Alarm Remote Replacement

Posted: 10 Apr 2014 20:23
by SJBS
Ek dink jy het nou ons aandag getrek :oldtimer:

Jy het nie dalk a wiring diagram gemaak toe jy dit ingesit het nie?

Of, hoe het jy gou bepaal hoe om die nuwe stelsel te bedraad?

Re: 1999's Alarm Remote Replacement

Posted: 11 Apr 2014 09:16
by Ink
Die sesteem kom met n diagram, en dis seker my 6de een wat ek al ingesit het, soos ek se dis regtig baie maklik, en ek glo eenige sound shop sal dit aanhou self n MIDAS behoort aan te hou. Sal die naweek kyk of ek nog die diagram het en dan fotos neem van hoe ek dit ingesit het en als post. Soos ek se vir R450 is dit goet. Hy het self n funksie wat jy kan gebruik om jou dak ligies aan te sit as jy die knoppie druk om die deure oop te sluit en as jy weer die deure sluit bly die dak ligies aan vir 5 sekondes. Dit het even n car find vir as jy vergeet het waar jy jou patrol gestop het kan jy hom laat aktiveer met die remote dan gaan sy alarm af, ek het nou nie daai probleem nie aangesien my patrol gewoonlik bo al die voertuie uitstaan in n parking lot. Die kat eye een is een van die nuutste op die mark daar is baie ander maake ook. Al die sesteeme kom met central locking en en en, so vir die wat se voertuie nie central locking het nie kan dit nou he en as jou voertuig het kan jy nuwe actuators in sit dan werk als weer of dit bere vir as een van jou deure sin gebreek het. Die shops by vloi markte het ook gewoonlik sulke sesteeme te koop. Skree as julle nog inligting soek.

Re: 1999's Alarm Remote Replacement

Posted: 11 Apr 2014 10:08
by SJBS
Baie Dankie.

Wat ek graag sal wil he is die patrol standaard drade se benamings. bv:
Patrol:
Rooi/wit = 12V
Blou/Geel = Central Locking trigger


Cateye: (Hopelik nie benodig nie want dit behoort saam met die alarm te kom)
Rooi of pin 1 = 12V
Groen of pin 2 = Central Locking Trigger

etc.

Dit sal net die installasie vergemaklik, ander moet ek self die drade identifiseer deur "trail and error", en hopelik nie iets seer maak nie :think:

Re: 1999's Alarm Remote Replacement

Posted: 11 Apr 2014 10:30
by Ink
ok sal kyk en n diagram met kleur kodes en fotos maak

Re: 1999's Alarm Remote Replacement

Posted: 16 Jul 2014 14:39
by Florian320
Hi Ink,

thanks for your input. Do you have any kind of pictures of the conlog system while it was in your car? I had a look behind the right outer panel in the foot area but couldn't find anything which looked liked being from conlog.