Good day,
Yes as the heading says, I am looking for 1 x ZD30 Piston. It is for a direct injection turbo inter cooled motor. The piston must be standard with a 46 mm cup in the crown.
I only need one piston. The one was damaged due to a dripping injector, the other pistons were checked and are well within spec. I will even consider a good 2nd hand piston, as long as it is within spec.
Please let me know.
PM me if you can assist please.
Thanks
Wanted ... ZD30 Piston Standard wit 46 mm cup
- PaulvdMerwe
- Senior Member
- Posts: 124
- Joined: 06 Jan 2016 15:21
- Full Name: Paul van der Merwe
- Nickname: Paul
- Home Town: Graaff Reinet
- Current 4x4: 2001 Patrol 3.0 DI GRX
- Home Language: Afrikaans
- Location: Graaff Reinet
- Has thanked: 2 times
- Been thanked: 6 times
-
- Senior Member
- Posts: 158
- Joined: 30 Jul 2010 16:40
- Full Name: greg justus
- Nickname: juice
- Home Town: benoni
- Current 4x4: patrol 2001
safari 1984 wagon
safari 1982 wagon - Home Language: english
- Has thanked: 1 time
- Been thanked: 12 times
Re: Wanted ... ZD30 Piston Standard wit 46 mm cup
Hi Paul
Send me your number I have a zd30 motor will have to check the spec
regards
greg
Send me your number I have a zd30 motor will have to check the spec
regards
greg
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: Wanted ... ZD30 Piston Standard wit 46 mm cup
Paul, how does the sleeve look?
Will you not consider getting a new set of pistons and rings from Alert?
Will you not consider getting a new set of pistons and rings from Alert?
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- PaulvdMerwe
- Senior Member
- Posts: 124
- Joined: 06 Jan 2016 15:21
- Full Name: Paul van der Merwe
- Nickname: Paul
- Home Town: Graaff Reinet
- Current 4x4: 2001 Patrol 3.0 DI GRX
- Home Language: Afrikaans
- Location: Graaff Reinet
- Has thanked: 2 times
- Been thanked: 6 times
Re: Wanted ... ZD30 Piston Standard wit 46 mm cup
Michael.
I houned the sleeves. They cleaned up very nice. Even the one that the piston failed. I measured it all up (pistons and sleaves) and there is hardly any wear.
I plan to put a new set of rings and big ends in.
I don't really want to spend to much on this engine, since I ultimately want to replace the motor with 4.5 or 4.8.
I houned the sleeves. They cleaned up very nice. Even the one that the piston failed. I measured it all up (pistons and sleaves) and there is hardly any wear.
I plan to put a new set of rings and big ends in.
I don't really want to spend to much on this engine, since I ultimately want to replace the motor with 4.5 or 4.8.
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: Wanted ... ZD30 Piston Standard wit 46 mm cup
Paul, ok makes sense and I am sure you find a piston somewhere.
I have requested a price on new pistons from a friend at Alert spares just for interest sake anyway so will let you know once he gets back to me
I have requested a price on new pistons from a friend at Alert spares just for interest sake anyway so will let you know once he gets back to me
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- PaulvdMerwe
- Senior Member
- Posts: 124
- Joined: 06 Jan 2016 15:21
- Full Name: Paul van der Merwe
- Nickname: Paul
- Home Town: Graaff Reinet
- Current 4x4: 2001 Patrol 3.0 DI GRX
- Home Language: Afrikaans
- Location: Graaff Reinet
- Has thanked: 2 times
- Been thanked: 6 times
Re: Wanted ... ZD30 Piston Standard wit 46 mm cup
Thanks,
Alert - R1127.00 Each without rings and EXCL VAT
Alert - R1127.00 Each without rings and EXCL VAT
Who is online
Users browsing this forum: No registered users and 15 guests