Drawer systems for patrols
- Oetie
- Senior Member
- Posts: 277
- Joined: 13 Jan 2014 15:21
- Full Name: Leon Fouche
- Nickname: Oetie
- Home Town: Rooihuiskraal, Centurion
- Current 4x4: 2009 TD42T Patrol
- Home Language: Afrikaans
- Has thanked: 356 times
- Been thanked: 130 times
Re: Drawer systems for patrols
I like this threat, keep them coming!!
Some brilliant designs and thought process shown here, thanks to all that are participating and showing their drawer systems!
Some brilliant designs and thought process shown here, thanks to all that are participating and showing their drawer systems!
One life, live it to the fullest!!
ORRA - L65
HAM - ZS6LEF
Tlou - 2009 Patrol TD42T
ORRA - L65
HAM - ZS6LEF
Tlou - 2009 Patrol TD42T
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
- Sweetlips
- Senior Member
- Posts: 218
- Joined: 02 Jun 2011 16:12
- Full Name: Lawrence
- Nickname: Sweetlips
- Home Town: Paarl
- Current 4x4: 2006 4.8 GRX
- Home Language: English
- Has thanked: 47 times
- Been thanked: 91 times
Re: Drawer systems for patrols
Tinus wys 'n bietie hoe lyk joune vir ons.
Life's a journey, enjoy the ride!!!
-
- Patrolman
- Posts: 640
- Joined: 07 Apr 2009 07:13
- Full Name: Malcolm van Coller
- Nickname: mvcoller
- Home Town: In most reverse order - Jhb, V-Town, Vryburg, CT
- Current 4x4: 2008 3.0 Di Patrol GL
and
1999 4.5 Patrol SGL - Home Language: Afr & Eng
- Location: Befordview
- Has thanked: 40 times
- Been thanked: 179 times
- Contact:
Re: Drawer systems for patrols
Myne is nie soveel 'n "rak stesel" of systeem nie, meer net ingerig om die spasie agterin so veel as moontlik te benut sonder om die laairuim te oorskrei. Agter sitplekke is nog alles ongeskonde en bruikbaar.
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 982 times
Re: Drawer systems for patrols
Mine looks rather ugly compared to the others posted above.
It is documented here: viewtopic.php?f=53&t=2236&hilit=Drawer
It is documented here: viewtopic.php?f=53&t=2236&hilit=Drawer
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Sweetlips
- Senior Member
- Posts: 218
- Joined: 02 Jun 2011 16:12
- Full Name: Lawrence
- Nickname: Sweetlips
- Home Town: Paarl
- Current 4x4: 2006 4.8 GRX
- Home Language: English
- Has thanked: 47 times
- Been thanked: 91 times
Re: Drawer systems for patrols
Malcolm do you mind posting some pics of your setup please.
Life's a journey, enjoy the ride!!!
- Oetie
- Senior Member
- Posts: 277
- Joined: 13 Jan 2014 15:21
- Full Name: Leon Fouche
- Nickname: Oetie
- Home Town: Rooihuiskraal, Centurion
- Current 4x4: 2009 TD42T Patrol
- Home Language: Afrikaans
- Has thanked: 356 times
- Been thanked: 130 times
Re: Drawer systems for patrols
This is an interesting layout - first time I have seen the fridge facing the interior to be opened from the inside.... make sense while traveling, where a side facing fridge on a slide again make sense when stationary and accessing from the back...Peter Connan wrote: ↑16 Apr 2019 05:27 Mine looks rather ugly compared to the others posted above.
It is documented here: viewtopic.php?f=53&t=2236&hilit=Drawer
The clip in steel boxes/slides is unique, but heavy?
One life, live it to the fullest!!
ORRA - L65
HAM - ZS6LEF
Tlou - 2009 Patrol TD42T
ORRA - L65
HAM - ZS6LEF
Tlou - 2009 Patrol TD42T
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 982 times
Re: Drawer systems for patrols
When conzidering materials of manufacture, weight is but one factor. Strength, cost and manufacturing costs are also important.
If I wanted to make the system from Aluminium, I would have needed to go thicker to make the hooks strong enough, which would have reduced the weight advantage quite a lot. I would also have had to pay somebody else to do the welding, as I don't have the ability. That would obviously have increased the cost quite a lot.
I could have used plywood too, but that would have been a lot less space efficient...
Swings and roundabouts... At the time space efficiency and cost were more important to me than weight.
If I wanted to make the system from Aluminium, I would have needed to go thicker to make the hooks strong enough, which would have reduced the weight advantage quite a lot. I would also have had to pay somebody else to do the welding, as I don't have the ability. That would obviously have increased the cost quite a lot.
I could have used plywood too, but that would have been a lot less space efficient...
Swings and roundabouts... At the time space efficiency and cost were more important to me than weight.
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Patrolman
- Posts: 640
- Joined: 07 Apr 2009 07:13
- Full Name: Malcolm van Coller
- Nickname: mvcoller
- Home Town: In most reverse order - Jhb, V-Town, Vryburg, CT
- Current 4x4: 2008 3.0 Di Patrol GL
and
1999 4.5 Patrol SGL - Home Language: Afr & Eng
- Location: Befordview
- Has thanked: 40 times
- Been thanked: 179 times
- Contact:
Re: Drawer systems for patrols
Hi Sweetlips
Here it is: viewtopic.php?f=54&t=7425
I bolted two 50mm wide, 5mm thick metal strips, running from left to right of the back. They are bolted to the existing tie-downs in the vehicle, to which the packing system is bolted. No holes were drilled into the body for holding the system securely in place.
I have since added spice holders in the rearmost window on the fridge side (big door) and insect spray and Mylol insect repellent bottle holders on the smaller door window, obviously both on the inside.
I have a Aux battery in the engine bay, but also one (with the extra outlets and voltage meter) in the load bay, above the left rear wheel arch. It was wasted space and only just big enough to fit in a battery box, and the box is big enough to hold a 105ah battery, completely out of the way. You can see this box in the second last picture in the thread revered to above.
It is a bit of a pain to get to and an enormous pain to get a battery in or out, but being a good quality Deep Cycle unit, this should only have to happen once in about 5 or 7 years. The top shelf has a cut-out, the lid of which is held in place with 2 x 6mm countersunk machine screws. With the lid removed, the plastic box goes in by putting it on its side and then tilting it down, into the space, onto a platform suspended on the uprights of the packing system frame. This is just millimeters above the side pocket above the wheel arch. The box is hardly visible there, so you can imagine what a tight fit it is.
To get the battery in there is really really difficult (takes about 15 to 20 minutes). The battery has to be put into a plastic bag, as even though they are sealed batteries, they still have small breathers where the gasses from the charging process escapes. Then the battery must be turned to lie on its right side and lifted to head height and put onto the top shelf (with only about 25mm space to the roof lining!). Then it must slowly and carefully be moved and tilted into the plastic box (battery still inside the thick plastic bag for when you want or need to remove it!!) Now the plastic battery box's lid can be fitted and the strap (another huge task) to hold the lid down can be pulled tight around box and over the box lid.
When I get the energy and inclination, I have to remove the Aux battery on the left front fender inside the engine bay, to make sure the mountings are strong enough to take the weight of the battery. I only became aware of the inner fender cracking from the battery weight, after I had already fitted the battery there....
Malcolm.
Here it is: viewtopic.php?f=54&t=7425
I bolted two 50mm wide, 5mm thick metal strips, running from left to right of the back. They are bolted to the existing tie-downs in the vehicle, to which the packing system is bolted. No holes were drilled into the body for holding the system securely in place.
I have since added spice holders in the rearmost window on the fridge side (big door) and insect spray and Mylol insect repellent bottle holders on the smaller door window, obviously both on the inside.
I have a Aux battery in the engine bay, but also one (with the extra outlets and voltage meter) in the load bay, above the left rear wheel arch. It was wasted space and only just big enough to fit in a battery box, and the box is big enough to hold a 105ah battery, completely out of the way. You can see this box in the second last picture in the thread revered to above.
It is a bit of a pain to get to and an enormous pain to get a battery in or out, but being a good quality Deep Cycle unit, this should only have to happen once in about 5 or 7 years. The top shelf has a cut-out, the lid of which is held in place with 2 x 6mm countersunk machine screws. With the lid removed, the plastic box goes in by putting it on its side and then tilting it down, into the space, onto a platform suspended on the uprights of the packing system frame. This is just millimeters above the side pocket above the wheel arch. The box is hardly visible there, so you can imagine what a tight fit it is.
To get the battery in there is really really difficult (takes about 15 to 20 minutes). The battery has to be put into a plastic bag, as even though they are sealed batteries, they still have small breathers where the gasses from the charging process escapes. Then the battery must be turned to lie on its right side and lifted to head height and put onto the top shelf (with only about 25mm space to the roof lining!). Then it must slowly and carefully be moved and tilted into the plastic box (battery still inside the thick plastic bag for when you want or need to remove it!!) Now the plastic battery box's lid can be fitted and the strap (another huge task) to hold the lid down can be pulled tight around box and over the box lid.
When I get the energy and inclination, I have to remove the Aux battery on the left front fender inside the engine bay, to make sure the mountings are strong enough to take the weight of the battery. I only became aware of the inner fender cracking from the battery weight, after I had already fitted the battery there....
Malcolm.
- Sweetlips
- Senior Member
- Posts: 218
- Joined: 02 Jun 2011 16:12
- Full Name: Lawrence
- Nickname: Sweetlips
- Home Town: Paarl
- Current 4x4: 2006 4.8 GRX
- Home Language: English
- Has thanked: 47 times
- Been thanked: 91 times
Re: Drawer systems for patrols
So after months of research i decided that this is the best design for me and my family requirements.
The wife is adamant that the jump seats must stay so to meet her halfway i designed it around 1 jump seat permanently in and the second one can be installed if needed.
The front part of the system, the drawers will be permanently fixed while the back part i want to be able to remove if the second jump seat is required(Which will be very seldom).
Now i must figure out what will be the lightest construction and is going full wood construction a good solution?
Hope you guys can make out my crude design
The wife is adamant that the jump seats must stay so to meet her halfway i designed it around 1 jump seat permanently in and the second one can be installed if needed.
The front part of the system, the drawers will be permanently fixed while the back part i want to be able to remove if the second jump seat is required(Which will be very seldom).
Now i must figure out what will be the lightest construction and is going full wood construction a good solution?
Hope you guys can make out my crude design
- Attachments
-
- drawer system.pdf
- (12.95 KiB) Downloaded 300 times
Life's a journey, enjoy the ride!!!
Who is online
Users browsing this forum: No registered users and 4 guests