Is this Winch mount any good?
- vanhack
- Senior Member
- Posts: 140
- Joined: 01 Oct 2014 06:58
- Full Name: Siddharth Patel
- Nickname: Sid
- Home Town: Dubai, UAE
- Current 4x4: Y61 LWB Patrol TB48E, Auto
- Home Language: English
- Has thanked: 36 times
- Been thanked: 23 times
Is this Winch mount any good?
Hi folks, I would like your opinion on the attached Winch mount that is up for sale here. This is available through a known offroad contact, used to be a LR fan, but has now seen the light and drives a Y61.
Anyhow he is selling this winch mount, it is unusal from most other mounts I have seen to be fitted to the chassis rails on a alloy bull bar with winch mount or the stock plastic bumper which is what I would do, as we have no need for bullbars here.
The price is fairly low, and probably the same as having one fabricated, I have option to buy an expensive winch cradle made in Portugal, or buy a used winch and factory Nissan winch cradle from a scrap yard, only issue is that the winch is a Warn M8000, therefore perhaps just a tad under for the patrols weight.
Anyhow he is selling this winch mount, it is unusal from most other mounts I have seen to be fitted to the chassis rails on a alloy bull bar with winch mount or the stock plastic bumper which is what I would do, as we have no need for bullbars here.
The price is fairly low, and probably the same as having one fabricated, I have option to buy an expensive winch cradle made in Portugal, or buy a used winch and factory Nissan winch cradle from a scrap yard, only issue is that the winch is a Warn M8000, therefore perhaps just a tad under for the patrols weight.
- Attachments
-
- winch_cradle.jpg (161.14 KiB) Viewed 3694 times
Y61 LWB Patrol TB48E, Auto
Distributor for www.quickpitchgcc.com in Middle East & India
Distributor for www.quickpitchgcc.com in Middle East & India
- Chris Skinner
- Patrolman
- Posts: 852
- Joined: 26 Nov 2009 12:58
- Full Name: Chris Skinner
- Nickname: Chris
- Home Town: Centurion
- Current 4x4: Nissan Patrol 4,8 GRX 2005
- Home Language: English
- Has thanked: 10 times
- Been thanked: 53 times
Re: Is this Winch mount any good?
Not sure about the winch plate... but don't be put off by the M8000, its a great winch. I been using one for 20 years on patrols and for pulling my 2 ton boat back on trailer.
I did just buy a new one in fact. I also added the 6hp motor from the Warn 9500i (buy on ebay) - and if you then do a calc using the new ones power, the winch is actually pulling 12tons. I also added a plasma rope --- will never use cable again!
I did just buy a new one in fact. I also added the 6hp motor from the Warn 9500i (buy on ebay) - and if you then do a calc using the new ones power, the winch is actually pulling 12tons. I also added a plasma rope --- will never use cable again!
- Attachments
-
- 20130303_152633.jpg (138.22 KiB) Viewed 3680 times
- Bruin Beer
- Senior Member
- Posts: 312
- Joined: 15 May 2012 19:49
- Full Name: Riaan Delport
- Nickname: Rooian
- Home Town: Pretoria
- Current 4x4: Nissan Patrol 4.8 GRX
- Home Language: Afrikaans
- Has thanked: 6 times
- Been thanked: 21 times
Re: Is this Winch mount any good?
Van Hack,
Can not picture the fixture points on the Patrol where this plate would mount to but in my humble opinion the mounting points on the plate look a little light for the job with not enough triangular load distribution.
Maybe some of the more experienced guys will also comment.
All the best.
Riaan
Can not picture the fixture points on the Patrol where this plate would mount to but in my humble opinion the mounting points on the plate look a little light for the job with not enough triangular load distribution.
Maybe some of the more experienced guys will also comment.
All the best.
Riaan
- Peter Connan
- Moderator
- Posts: 6011
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 985 times
Re: Is this Winch mount any good?
I agree with Riaan. Can't quite figure where this mounts, but if it is just the two "outriggers" mounting to the chassis it's probably not going to do the job.
I would far rather go for the factory setup with the M8000. Just buy a snatch block to make up for the possible lack of power.
I would far rather go for the factory setup with the M8000. Just buy a snatch block to make up for the possible lack of power.
Mag ons ons kenniskry met lekkerkry aanhoukry.
- vanhack
- Senior Member
- Posts: 140
- Joined: 01 Oct 2014 06:58
- Full Name: Siddharth Patel
- Nickname: Sid
- Home Town: Dubai, UAE
- Current 4x4: Y61 LWB Patrol TB48E, Auto
- Home Language: English
- Has thanked: 36 times
- Been thanked: 23 times
Re: Is this Winch mount any good?
Thanks folks for the valuable feedback. I will get the m8000 with factory cradle. The scrapyard is asking for 15000 ZAR...of course heavy negotiations are due to bring the price down
Y61 LWB Patrol TB48E, Auto
Distributor for www.quickpitchgcc.com in Middle East & India
Distributor for www.quickpitchgcc.com in Middle East & India
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
- vanhack
- Senior Member
- Posts: 140
- Joined: 01 Oct 2014 06:58
- Full Name: Siddharth Patel
- Nickname: Sid
- Home Town: Dubai, UAE
- Current 4x4: Y61 LWB Patrol TB48E, Auto
- Home Language: English
- Has thanked: 36 times
- Been thanked: 23 times
Re: Is this Winch mount any good?
Price is for both winch and cradle...why?
Y61 LWB Patrol TB48E, Auto
Distributor for www.quickpitchgcc.com in Middle East & India
Distributor for www.quickpitchgcc.com in Middle East & India
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
Re: Is this Winch mount any good?
We buy a 9000 come up for about 6600 zar and winch plate 1500 zar that sounds a bit heavy for a second hand unit but its just my opinion hey ....
- vanhack
- Senior Member
- Posts: 140
- Joined: 01 Oct 2014 06:58
- Full Name: Siddharth Patel
- Nickname: Sid
- Home Town: Dubai, UAE
- Current 4x4: Y61 LWB Patrol TB48E, Auto
- Home Language: English
- Has thanked: 36 times
- Been thanked: 23 times
Re: Is this Winch mount any good?
How much does a 9000lbs warn cost? We don't have come up distributor here. I did check the prices for new m8000 on Amazon US and they are zar9000.00 for winch only.
We do have the lesser known brands here, t-max...but the price was 9900zar for winch and fairlead only.
We do have the lesser known brands here, t-max...but the price was 9900zar for winch and fairlead only.
Y61 LWB Patrol TB48E, Auto
Distributor for www.quickpitchgcc.com in Middle East & India
Distributor for www.quickpitchgcc.com in Middle East & India
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
Re: Is this Winch mount any good?
You will never go wrong with warn winch very good quality a bit overpriced here about 11000 zar for a 9000 pound one .
We normally bolt them to bull bars but the odd wichplate is floating around ...try to get the plasma rope like Chris suggested ..
We normally bolt them to bull bars but the odd wichplate is floating around ...try to get the plasma rope like Chris suggested ..
Who is online
Users browsing this forum: No registered users and 7 guests