Bash Plates
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Bash Plates
Hello Ladies and Gentlemen
To try and limit confusion, I have decided to start a new thread on this. Also, my apologies for the long delay.
I have now had the opportunity to measure a wide variety of Patrols, and I am reasonably confident that I can now manufacture a bash plate for any Y60 or Y61 patrol. Basically, there are three variants. These are the Y60, the Y61 with all engines except the 4.8, and then the 4.8. Some aftermarket bumpers on the Y60 use the mounting points I would like to use, but on these the Y61 bash plate should fit. There is also a special version for the Y61 (non 4.8) with ARB bull bar which is longer and joins to the bull bar, specifically designed for Izak.
The bash plates are all manufactured from 5mm Mild steel. Prices for all the bash plates except the special Y61/ARB will be R850.00 in raw steel or R950.00 if you want it galvanized. The Y61/ARB will be R1100 raw or R1200 galvanized. Delivery should be around three weeks from the day I place the orders.
50% minimum deposited to FNB Woodbridge branch, account number 62246897659 (savings account) with proof of payment e-mailed to peterconnan@za.spiraxsarco.com secures your order.
Regards
Peter
To try and limit confusion, I have decided to start a new thread on this. Also, my apologies for the long delay.
I have now had the opportunity to measure a wide variety of Patrols, and I am reasonably confident that I can now manufacture a bash plate for any Y60 or Y61 patrol. Basically, there are three variants. These are the Y60, the Y61 with all engines except the 4.8, and then the 4.8. Some aftermarket bumpers on the Y60 use the mounting points I would like to use, but on these the Y61 bash plate should fit. There is also a special version for the Y61 (non 4.8) with ARB bull bar which is longer and joins to the bull bar, specifically designed for Izak.
The bash plates are all manufactured from 5mm Mild steel. Prices for all the bash plates except the special Y61/ARB will be R850.00 in raw steel or R950.00 if you want it galvanized. The Y61/ARB will be R1100 raw or R1200 galvanized. Delivery should be around three weeks from the day I place the orders.
50% minimum deposited to FNB Woodbridge branch, account number 62246897659 (savings account) with proof of payment e-mailed to peterconnan@za.spiraxsarco.com secures your order.
Regards
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Bash Plates
Sorry guys, I forgot to add:
Please also remind me what you drive (model, engine and bumper). This does not apply to the guys whose cars I measured.
Also, these bash plates are all designed to be able to accomodate two bow shackles for recovery purposes, and grass seed netting attachment points.
Thanks
Peter
Please also remind me what you drive (model, engine and bumper). This does not apply to the guys whose cars I measured.
Also, these bash plates are all designed to be able to accomodate two bow shackles for recovery purposes, and grass seed netting attachment points.
Thanks
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Wynvat
- Senior Member
- Posts: 120
- Joined: 08 Apr 2009 09:44
- Full Name: Gerhard van Rhyn
- Nickname: Wynvat
- Home Town: Centurion
- Current 4x4: Patrol 4.8 GRX Y61 GU(4)
- Home Language: Afrikaans
- Location: Centurion
- Been thanked: 1 time
Re: Bash Plates
Thanks Peter
Ordered, paid (50%) and e-mailed.
(Bashplate and Transfer Case Skidplate).
Regards,
Gerhard
Ordered, paid (50%) and e-mailed.
(Bashplate and Transfer Case Skidplate).
Regards,
Gerhard
2007 Patrol 4.8 GRX Tiptronic Y61/GU(4)
Africa does not break a Patrol. A Patrol breaks Africa.
Africa does not break a Patrol. A Patrol breaks Africa.
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Bash Plates
Tinus the standard bash plate for your 4.8 will fit with every bumper I have yet seen.
For the guys with the other engines, basically the same goes. The bash plate will fit with every bumper I have seen, with the possible exception of ONCA, which has it's own bash plate.
Cheers
Peter
For the guys with the other engines, basically the same goes. The bash plate will fit with every bumper I have seen, with the possible exception of ONCA, which has it's own bash plate.
Cheers
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Kagiso II
- Patrolman 1000+
- Posts: 3453
- Joined: 10 Jun 2009 16:58
- Full Name: Mac Mc Menamin
- Nickname: Oom Mac [Uncle Mac] [Uncle] [Oompie] Kagiso
- Home Town: BrentwoodPark, Benoni
- Current 4x4: 1982 Datsun Safari 2,8 aka LOBO; [1,300,000 Km verby !]
'99 PATROL 4,2 diesel.
2012 Jimny [SWAMBO se Kantoor-toe] - Home Language: AFRIKAANS
- Location: Benoni and wherever the Outreach takes me.
- Has thanked: 299 times
- Been thanked: 155 times
- Contact:
Re: Bash Plates
P/ter - se vi oompie, daai "underbelly" plate wat Agarob nou reeds het en die "bash-plate" wat nou oppad is - helle sal so saam-saam kan werk mos? ek meen, hulle gaan nie baklei oor vasmaak 'spots' nie??
BRILJANT van jou om die 'saadnet' ankers by te sit ... dit alleen is oorie honneert punte werd !!
Ek stoei nog steeds met Hennie vir pryse op die uitswaaidakkie se seile.. ek kry al skaam vir sy part.
Ek gaan Noorde se kant toe - ek sal dan ook by Tannie Miem stop en hoor wat sy kan uitrig.
BRILJANT van jou om die 'saadnet' ankers by te sit ... dit alleen is oorie honneert punte werd !!
Ek stoei nog steeds met Hennie vir pryse op die uitswaaidakkie se seile.. ek kry al skaam vir sy part.
Ek gaan Noorde se kant toe - ek sal dan ook by Tannie Miem stop en hoor wat sy kan uitrig.
Don't bring God down to your level of faith ... bring your faith up to His level!
- Peter Connan
- Moderator
- Posts: 6017
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Bash Plates
Dis reg Oom Mac, die twee plate baklei nie met mekaar nie.
Was oom saterdag by Hennops? Ons was daar, maar ek kon Oom nie raakloop nie. Het wel Christo, Cedrick en Kobus te siene gekry, maar daar was seker amper honnert karre daar. Baie suksesvolle dag vir die Nissan club ne?
Partykeer is dit amper onmoontlik om ouens te kry om te kwoteer. Ek hoop maar dit beteken dit gaan so goed met sy besigheid dat hy nie ekstra werk nodig het nie?
Peter
Was oom saterdag by Hennops? Ons was daar, maar ek kon Oom nie raakloop nie. Het wel Christo, Cedrick en Kobus te siene gekry, maar daar was seker amper honnert karre daar. Baie suksesvolle dag vir die Nissan club ne?
Partykeer is dit amper onmoontlik om ouens te kry om te kwoteer. Ek hoop maar dit beteken dit gaan so goed met sy besigheid dat hy nie ekstra werk nodig het nie?
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Senior Member
- Posts: 164
- Joined: 21 Dec 2009 08:54
- Full Name: Wilfred Moore
- Nickname: Wilfred
- Home Town: Centurion
- Current 4x4: 2010 Nissan Patrol 4800 GRX
- Home Language: Afrikaans
- Has thanked: 2 times
- Been thanked: 4 times
-
- Junior Member
- Posts: 12
- Joined: 15 May 2010 17:57
- Full Name: Dave Henson
- Nickname: Dave
- Home Town: Midrand
- Current 4x4: 2007 Nissan Patrol 4.8grx
- Home Language: English
Re: Bash Plates
Peter
Thanks for the trouble. I have ordered 1 galvanised bash plate and 1 transfer case cover for a 2007 4.8grx Patrol and sent 50% deposit to you.
Thanks for the trouble. I have ordered 1 galvanised bash plate and 1 transfer case cover for a 2007 4.8grx Patrol and sent 50% deposit to you.
Who is online
Users browsing this forum: No registered users and 17 guests