Nissan Patrol 4x4 (Africa)

Dirk please put my name down for the 27 april
regards
juice

You can powder coat hot dipped galvanising ' you need to tell the guys where you get it done not to passavate it ( so when you get it back it a dall colour and not shiny) the powder coating sits on the surface like no tomorrow, All clear view fencing is done like that Electrogalv plating does not ge...

Speak to David in warmbaths he has stock 'tie rod end and other front suspension
Parts . He imports them from aus , just replaced my tie rod ends on the y61
Priced well below Nissan

Try Che radiators , they manufacture the cores , their factory is in cape town and they have a workshop here
in jet park , they sorted my intercooler out on the 3L and build the large radiators up for the earthmoving
machines
juice

I had the same issue when I rebuild my front diff ' the older ones did not have a outer oil seal, There is a oil seal on the inside at the pumpkin which has to replaced ' The oil will run into the tube and over the years it filled up and started to leak ' if you Park at a angle with the left wheel l...

NATS (Nissan anti theft system ) If your battery has been disconnected for a while the NATS wants to see both keys that have been programmed into to the ecu , just put first key in turn car on / take the second key turn car on , it should reset I had my pump done a few years back and had a similar p...

Morning I changed my safari from a L28 to a rd28 motor many years ago The bell housing is the same but it does not bolt directly on to the motor' there is one of the main bolts on top that you have to weld up and redrill, most rd motor you can get are automatic, I have only every seen one at Japan a...

If you want coil springs try a brand call Pedder suspensions they import the goods from Australia they are close to the rivonia off ramp Bought shocks from them at a reasonable price for a two inch lift so far so good, ride is nice my ome shocks were karput , only time will tell There shocks are in ...

ok
going to get it to mr cedric to draw it up and get it cut and bent ,
and plated
let see how many I must get made , I sure Mr cedric can deliver them to the cape
befor xmas

i will take it and get a few cut and bent
regards
greg
juice