Nissan Patrol 4x4 (Africa)

I replaced my ARB bumper lights with LED bumper lights from 4x4 direct. I think they're R400 each.

Here's some ideas I'd consider: Starter motor Alternator Belts Replace all the water hoses check/replace radius arm bushes check Drag link and tie rod bushes Replace panhard rod bushes (Front and rear) Probably handbrake cable if its not smooth any more Vacuum hoses to locker and breathers (like Tij...

Others might also correct me if they don't think it necessary but a vehicle older than 15 years the difflock's rubber vacuum hoses tend to harden and crack which can slowly engage the difflock while driving, the diff will still work but realising the diflock doesn't work while on a solo trip is not ...

I Highly recommend replacing the suspension bushes at 200+ Km it is very likely the dreaded death wobbles might start. Also with the auto a good flush and clean of the gearbox is not a bad idea.

Starter alternator is a must .

I when you replace your radiator hoses and fan belts, keep the old ones and fasten them with cable ties somewhere in the engine bay as emergency spares. At least you know that they will fit, they are instantly available and that they should still be OK if used in an emergency. Even new hoses or belt...

If it's not done every couple of years, definitely replace the brake fluid.

Jannie I wouldn't get most of the stuff from Nissan, but I would get the nissan viscous hub, water pump and thermostat. for belts: Just go to the local parts store and get the belts (Dunlop makes them so do a number of other manufacturers) For the water hoses get the kit from TerrainTamer. it includ...

If you bother carrying a spare starter with you I suggest also getting the tools to fit it. Starter replacement on a patrol is a really tedious process needing extra hands with extra wrists on them. A swivel joint for your socket spanner set is a must

If you bother carrying a spare starter with you I suggest also getting the tools to fit it. Starter replacement on a patrol is a really tedious process needing extra hands with extra wrists on them. A swivel joint for your socket spanner set is a must Agreed The starter sits on the kakkest spot. Ca...