TD42 engine assembly
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
TD42 engine assembly
Hi All
I just want to give some background on what I am doing
I bought a Patrol on auction with a stripped engine. After buying it and inspecting it I decided to overhaul the whole engine.
I have now received the engine block back from the engineers and started assembling it over the weekend. Of course they had to skim the block a bit and the piston height above the block are going to be to much now. They currently measure 0.27 - 0.33mm and I think I read on one of the other posts that they should be between 0.025 and 0.03?
Can anyone confirm this?
I just want to give some background on what I am doing
I bought a Patrol on auction with a stripped engine. After buying it and inspecting it I decided to overhaul the whole engine.
I have now received the engine block back from the engineers and started assembling it over the weekend. Of course they had to skim the block a bit and the piston height above the block are going to be to much now. They currently measure 0.27 - 0.33mm and I think I read on one of the other posts that they should be between 0.025 and 0.03?
Can anyone confirm this?
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- Kagiso II
- Patrolman 1000+
- Posts: 3453
- Joined: 10 Jun 2009 16:58
- Full Name: Mac Mc Menamin
- Nickname: Oom Mac [Uncle Mac] [Uncle] [Oompie] Kagiso
- Home Town: BrentwoodPark, Benoni
- Current 4x4: 1982 Datsun Safari 2,8 aka LOBO; [1,300,000 Km verby !]
'99 PATROL 4,2 diesel.
2012 Jimny [SWAMBO se Kantoor-toe] - Home Language: AFRIKAANS
- Location: Benoni and wherever the Outreach takes me.
- Has thanked: 299 times
- Been thanked: 155 times
- Contact:
Re: TD42 engine assembly
Hi Miche'l .. Jy moet direk met Frans [tour de frans ./. wat NIX met baaisiekels te doen het nioe ] komunikeer oor die een .. al die telleransies sal hy jou mee kan help .
synde jy nounie kiekies van die Trol in AKSIE kan plak nie -- plak dan maar kiekies van die Trol UIT aksie
synde jy nounie kiekies van die Trol in AKSIE kan plak nie -- plak dan maar kiekies van die Trol UIT aksie
Don't bring God down to your level of faith ... bring your faith up to His level!
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: TD42 engine assembly
Hi Kagiso
Dankie, ja ek het hom n boodskap gestuur so sal hoor wat hy se.
Man ek het net n paar fotos van die engine en presies wat ek op die engine doen wat ek kan post?
Dankie, ja ek het hom n boodskap gestuur so sal hoor wat hy se.
Man ek het net n paar fotos van die engine en presies wat ek op die engine doen wat ek kan post?
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: TD42 engine assembly
Everything under the head is basically flush, so the only spacing between the piston tops and the valves will be the head gasket thickness. If I recall the head gasket thickness from Nissan comes in 3 thicknesses. I may be wrong on this but I think they are 1.15 - 1.25 and 1.5
The protrusion is a concern.... here's a few quotes from my original post...
a) Fitting the sleeves are simple and engeneering has to do that.The sleeves HAS TO PROTRUED THE BLOCK.According to specs 0.02-0.09mm
b) The head need to be skimmed after that,because the precoms will stand proud.The specs say precom protrusion are -0.05mm.Dont try to get that,some engeneering guys get it wrong and can mess up your head and head.
I don't think the pistons should protrude more than the sleeves !!!
The protrusion is a concern.... here's a few quotes from my original post...
a) Fitting the sleeves are simple and engeneering has to do that.The sleeves HAS TO PROTRUED THE BLOCK.According to specs 0.02-0.09mm
b) The head need to be skimmed after that,because the precoms will stand proud.The specs say precom protrusion are -0.05mm.Dont try to get that,some engeneering guys get it wrong and can mess up your head and head.
I don't think the pistons should protrude more than the sleeves !!!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: TD42 engine assembly
ricster I agree, the pistons are way to high but also they have taken a lot of the block away for some reason..... so much that you can barely read the engine number any more.
The Pistons are at the engineer at the moment to be topped so that they don't protrude so much, but not sure how much they should skim off
The Pistons are at the engineer at the moment to be topped so that they don't protrude so much, but not sure how much they should skim off
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- Kagiso II
- Patrolman 1000+
- Posts: 3453
- Joined: 10 Jun 2009 16:58
- Full Name: Mac Mc Menamin
- Nickname: Oom Mac [Uncle Mac] [Uncle] [Oompie] Kagiso
- Home Town: BrentwoodPark, Benoni
- Current 4x4: 1982 Datsun Safari 2,8 aka LOBO; [1,300,000 Km verby !]
'99 PATROL 4,2 diesel.
2012 Jimny [SWAMBO se Kantoor-toe] - Home Language: AFRIKAANS
- Location: Benoni and wherever the Outreach takes me.
- Has thanked: 299 times
- Been thanked: 155 times
- Contact:
Re: TD42 engine assembly
Hi Miche'l - relax oor die kiekies -- as ek nie vir kiekies vra nie is dit nie meer ek nie :-)
maar n kiekie van n leeg enjinbay van n Patrol sal nogal raar wees . daar kannie meer as 5 bestaan nie ??
maar n kiekie van n leeg enjinbay van n Patrol sal nogal raar wees . daar kannie meer as 5 bestaan nie ??
Don't bring God down to your level of faith ... bring your faith up to His level!
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: TD42 engine assembly
This is NOT good in my opinion. The thicker the piston top the better. The thinner the piston top, the bigger the chance of a hole in the piston due to high EGT's. There are oil squirters on the block under the pistons that shoot oil onto the underside of the piston crown to assist with cooling of the piston and lubrication.
Why did they have to skim the block? I cannot believe that the block was warped.
I'm thinking that with the new head and the skimmed block it would be better to use a thicker head gasket than to skim the pistons down..... even by a fraction of a millimeter !!!
I'll come through to you tonight after my meeting and lets see. Hopefully Frans can see this before we meet tonight.
Why did they have to skim the block? I cannot believe that the block was warped.
I'm thinking that with the new head and the skimmed block it would be better to use a thicker head gasket than to skim the pistons down..... even by a fraction of a millimeter !!!
I'll come through to you tonight after my meeting and lets see. Hopefully Frans can see this before we meet tonight.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: TD42 engine assembly
why they skimmed the block is a long story..... Ill give you the details tonight.
I don't think (hope) the skimming of the pistons will make the piston that much weaker, worst case they will be taking off 0.30mm which is very little but I get what you are saying. I have heard people do it before.
I don't think (hope) the skimming of the pistons will make the piston that much weaker, worst case they will be taking off 0.30mm which is very little but I get what you are saying. I have heard people do it before.
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: TD42 engine assembly
Here are some before and after photos of the progress on the Patrol.
While I am waiting for some engine parts I started working on the suspension a bit, getting it clean and giving it a new coat of paint.
While I am waiting for some engine parts I started working on the suspension a bit, getting it clean and giving it a new coat of paint.
- Attachments
-
- suspension_5-1900.jpg (171.63 KiB) Viewed 8652 times
-
- suspension_4-1900.jpg (155.92 KiB) Viewed 8652 times
-
- suspension_3-1900.jpg (228.31 KiB) Viewed 8652 times
-
- suspension_2-1900.jpg (240.35 KiB) Viewed 8652 times
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: TD42 engine assembly
And some after.....
- Attachments
-
- suspension_12-1900.jpg (196.19 KiB) Viewed 8651 times
-
- suspension_11-1900.jpg (188.06 KiB) Viewed 8651 times
-
- suspension_9-1900.jpg (140.83 KiB) Viewed 8651 times
-
- suspension_8-1900.jpg (197.6 KiB) Viewed 8651 times
-
- suspension_7-1900.jpg (147.22 KiB) Viewed 8651 times
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Who is online
Users browsing this forum: No registered users and 45 guests